© Panduit Corp. 2022
USER MANUAL
TDP43HET, TDP43HET/E,
TDP46HET,TDP46HET/E
B20733-02
Page 26 of 39
08-2022
Menu
Settings
Command
Set: TSPL
Speed
Density
Direction
Print Mode
None
Batch
Mode
Peeler
Mode
Cutter
Mode
Cutter
Batch
Rewinder
Mode
Offset
Shift X
Shift Y
Reference
X
Reference
y
Code Page
Country
3.3 Settings Menu (TSPL)
*TSPL is default setting for Panduit TDP43/46HETprinters and software*
Item
Description
Default
Speed
This feature is used to set the print speed
300 dpi: 4
600 dpi: 3
Density
This feature is used to set the print darkness
8
Direction
This feature sets the printout direction. Setting Value: 0 and 1.
Direction 0:
Direction 1:
0
Print Mode
This feature sets the print mode. There are 6 modes in total:
None:
Next label top of form is aligned to the print head burn line location.
Batch Mode:
Once finished the printing process, label will be fed to the
tear plate location.
Peeler Mode:
Enable the label peel off mode.
Cutter Mode:
Enable the label cutter mode.
Cutter Batch:
Cut the label once at the end of the printing job.
Rewinder Mode:
Enable the label rewinder mode.
Batch
Mode
Offset
This feature lets you adjust media stop location.
0 dot
Shift X
This feature lets you adjust print position.
-25 dot
Shift Y
0 dot
Reference X
This feature lets you set the origin of printer coordinate system horizontally
and vertically.
0 dot
Reference Y
0 dot
Code Page
This feature lets you set the code page of international
character set.
950
Country
This feature lets you set the country code
001
