Panduit SynapSense 1167, Installation & Use Manual

Page: 25 / 40

25
Activity Steps
Install
Industrial
Gateway
(T-Mount Feet
) The optional T-Mount Feet allow the Industrial Gateway to be directly installed to a
customer supplied plate or wall.
Each T-Mount is attached to the corner of the Gateway using (1) of the included screws
at the T center hole of the T-Mount foot.
The foot screw is inserted from inside the lid of the Industrial Gateway at each corner
access hole of the Gateway.
The T-Mount holes can then be used to mark the hole locations on the wall or Plate if
the Industrial Gateway is temporarily held at the installation location
.