PRINTER ADJUSTMENTS
The LCD Panel on the PTR3E is used in conjunction with the
LINE
and
FEED
switches by the operator to manually enter printer configuration settings. Many of
the settings can also be controlled via software commands and in the case of conflict
between software and control panel settings, the printer will always use the last
valid setting. If you load a label job that includes software settings and then enter a
new setting via the LCD Panel, the manually set values will be used by the printer.
If you set the values manually and then download a job with software settings, the
software settings will be used.
MODE
KEY SEQUENCE
INITIAL DISPLAY
PAGE
Normal
POWER
ONLINE
QTY: 000000
27
Advanced
LINE + POWER
ADVANCED MODE
29
Test Print
FEED + POWER
TEST PRINT MODE
CONFIGURATION
33
Default Setting
LINE + FEED + POWER
DEFAULT SETTING
YES NO
34
Clear Non-Standard Protocol
DSW2-7 ON + LINE + FEED +
POWER
ALT. PROTOCOL
COMPLETE
34
Protocol Code Download
DSW2-7 ON + POWER + LINE
USER DOWNLOAD
PRESS THE LINE KEY
34
Hex Dump
DSW2-4 ON + POWER
ONLINE
QTY: 000000
35
26
Section 3. Configuration
