background image

 

PES197 and PES197/E: ENGLISH 

 

PES197 & PES197/E: PA25609A01_01 

 

Page: 

of 

17 

    7-2009 

 

 

 

The Machine has been made with fireproof materials thus diminishing the risk of general 
fire. Short circuit protection has been implemented so that the power supply is 
immediately isolated thus avoiding unwanted current absorption from the external power 
line. 

 

 

Do 

Not

 place Liquids on the machine cover since it has not been water sealed. It is 

particularly important to avoid oxidations which would add to the wear and erosion of the 
mechanical parts. 

 

The machine has labels that indicate any danger areas. 

The meanings of these labels are explained below.

 

PANDUIT

 cannot be held responsible for the consequences of not abiding 

by these principles when using the machine. 

Therefore, in the case of breakdown, please call for Technical Assistance.

 

UNDER NO CIRCUMSTANCES REMOVE OR MODIFY THE INTERNAL COMPONENTS. 

 

DO NOT REMOVE SAFETY GUARD 

These safety guards should be removed only by specialized and authorized technical 
persons who haven taken care to adopt all security measures to avoid any risk of danger 
and injury. 

 

 

BE CAREFUL OF YOUR HANDS! RISK OF BEING CRUSHED OR 
STRUCK 

The machine in the wooden package weighs 145 lbs. (66 Kg) and the 
net weight is 95 lbs. (43 Kg); therefore all displacements should be done 
with two persons present.  

 

DANGER! HIGH TENSION 

It is forbidden to do any maintenance work while the machine is under electrical tension. To 
substitute a fuse or to do internal maintenance, disconnect the power supply and do not 
work on the power line. 

 

ATTENTION! MOVING MACHINE COMPONENTS 

If any maintenance work has to be done the technician must disconnect the power supply 
and work on the machine only when it has been stopped. 

 

ATTENTION! DANGER 

The machine when at work has several moving units. 
Do not work on the inside of the machine. 
Do not remove the cover or guards except for the front cover which is used to load the 
plates. 

 

GROUNDED (EARTHED) CABLES 

This symbol indicates that all the connected cables have been grounded (earthed). 

 

Summary of Contents for PES197




















Reviews: