AT-OMNI-121 / AT-OMNI-122
34
Basic Configuration Tutorial
1.
Locate the
Input 3
window group and verify that the
Enable
toggle switch is enabled. When enabled, the toggle
switch will be orange. Perform the same procedure for the
Input 4
window group.
2. Under the
Input 3
window group, enter
226.0.10.1
in the
Multicast address
field. Under the
Input 4
window
group, enter
226.0.10.2
in this field. These multicast IP address are the same addresses that were specified
under the
Audio
>
Destination IP address
field for the encoders.
3. In the
Port
field, enter
1100
under both
Input 3
and
Input 4
window groups. These are the same port settings
that were entered under the
Audio
>
UDP Port
section of the encoder.
4.
Click the
SAVE
button, under the
Input 3
and
Input 4
window groups to commit changes.
1
2
3
4
Audio Configuration
Although there is no hard and fast rule for which
Input
window groups should be used for video, audio, and/or
control, it can be helpful to visualize the
Input
window groups as columns and rows to better organize the IP data.
Here, each column of
Input
window groups represents an encoder.
Input Configuration Notes
Table 2.3 - Video and Audio information for each encoder.
Input
Multicast Address
Input 1
Video
(226.0.0.1:1000)
Input 3
Audio
(226.0.10.1:1100)
Input
Multicast Address
Input 2
Video
(226.0.0.2:1000)
Input 4
Audio
(226.0.10.2:1100)
Encoder #1
Encoder #2
