AT-OMNI-121 / AT-OMNI-122
110
Link speed
Displays the Ethernet interface link speed in Mbps. This
field cannot be modified.
MAC address
Displays the MAC address of the Ethernet interface.
Telnet Enable
Click this toggle switch to enable or disable Telnet.
If disabled, then Telnet sessions to the decoder cannot be
established.
Telnet Authenticator
Click this toggle switch to enable or disable Telnet
authentication. If enabled, then the toggle switch will
be orange. Once enabled, connecting to the decoder
using Telnet will require login credentials. The default
credentials are:
Username:
admin
Password:
Atlona
Configuration and Management Interfaces
WebUI Enable HTTP
Click this toggle switch to enable or disable HTTP. If disabled, traffic on port 80 is forbidden.
WebUI Enable HTTPS
Click this toggle switch to enable or disable HTTPS. If disabled, traffic on port 443 is forbidden.
802.1x Mode
Click this drop-down list to select the desired authentication mode.
Protocol
Description
none
802.1X protocol disabled
PEAP/MSCHAPv2
Protected EAP; requires basic credentials in addition to a CA (certificate authority)
certificate.
EAP-TLS
EAP Transport Layer Security; requires a client certificate, client private key, and CA
(certificate authority) certificate.
SAVE
Click this button to commit all changes within the
Network
window group.