manualshive.com logo in svg

Panduit ATLONA AT-UHD-SW-52ED, User Manual

Share
Download
Panduit ATLONA AT-UHD-SW-52ED User Manual Download Page 42

AT-UHD-SW-52ED

42

Configuration and Management Interfaces

Setting

Description

Baud rate

Sets the baud rate.  The following options are available: 2400, 9600, 19200, 38400, 

56000, 57600, 115200.

Data bit

Sets the number of data bits used to represent each character of data.  The following 

options are available:  7 or 8.

Parity

Sets the parity bit, which can be included with each character to detect errors during 

the transmission of data.  The following options are available:  None, Odd, or Even.

Stop bit

Sets the stop bit.  Stop bits are sent at the end of each character, allowing the client to 

detect the end of a character stream.  The following options are available:  1 or 2.

System

 

Sets the RS-232 port settings and used for local control by a third-party control system.

 

Output2

 

If the AT-UHD-SW-52ED is connected to a device such as the AT-UHD-EX-100CE-RX-PSE, the drop-down list 

boxes will be disabled and the HDBaseT baud rate will be locked at 115200.  If the AT-UHD-SW-52ED is connected 

to another HDBaseT device, such as the AT-UHD-CLSO-824, each of these drop-down list boxes can be set to the 

baud rate of the HDBaseT RS-232 settings on the corresponding device.

Factory Default

 

Click the 

Factory Default

 button to reset the current page to factory-default settings.  Note that clicking this button 

does not

 reset the AT-UHD-SW-52ED to factory settings.

Summary of Contents for ATLONA AT-UHD-SW-52ED


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands