manualshive.com logo in svg

Panduit ATLONA AT-UHD-SW-52ED, User Manual

Share
Download
Panduit ATLONA AT-UHD-SW-52ED User Manual Download Page 37

AT-UHD-SW-52ED

37

The AT-UHD-SW-52ED includes a built-in web server.  Atlona recommends that the web server be used to set up the

 

AT-UHD-SW-52ED, as it provides intuitive management of all features.  Follow the instructions below to access the 

webGUI.

1. 

Make sure that an Ethernet cable is connected between the LAN port on the AT-UHD-SW-52ED and the network.

2. 

Launch a web browser and enter the IP address of the unit.  If the default static IP address is being used, enter 

192.168.1.254.

3. 

The AT-UHD-SW-52ED 

Login

 page will be displayed.

Introduction to the Web Server

4. 

Enter the username and password in the 

Username

 and 

Password

 fields.  The default username and password 

are listed below:

 

 

Username: 

root

 

Password: 

Atlona

Configuration and Management Interfaces

5.  Click the 

Login

 button or press the ENTER key on the keyboard.

Summary of Contents for ATLONA AT-UHD-SW-52ED


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands