manualshive.com logo in svg

Panduit ATLONA AT-UHD-SW-52ED, User Manual

Share
Download
Panduit ATLONA AT-UHD-SW-52ED User Manual Download Page 13

AT-UHD-SW-52ED

13

Connection Instructions

Installation

1. 

Connect up to five UHD/HD sources, using HDMI cables, to ports 

HDMI IN 1

 through 

HDMI IN 5

.

2. 

Connect an HDMI cable from the 

HDMI OUT

 port to a UHD/HD display.

3. 

Connect a category cable (CAT-5e or better) from the 

HDBaseT OUT

 port to a compatible receiver.

 

 

Refer to the tables below for recommended cabling when using Altona products with HDBaseT technology.

 

The green bars indicate the signal quality when using each type of cable.  Higher-quality signals are represented 

by more bars.  

These tables are for guidance, only.  Performance may vary, based on environmental factors.

Cable

Max. Distance @ 4K 

Max. Distance @ 1080p

CAT5e

295 feet (90 meters)

330 feet (100 meters)

CAT6a / CAT6a / CAT7

330 feet (100 meters)

330 feet (100 meters)

IMPORTANT:  

Stranded or patch cable is not recommended due to performance issues.

 

Sheilded cables are strongly recommended to minimize signal noise and interference.

Core

Shielding

CAT5e

CAT6

CAT6a

CAT7

Solid

UTP (unshielded)

N/A

STP (sheilded)

4. 

Connect an Ethernet cable from the 

LAN

 port to the Local Area Network (LAN).

5. 

OPTIONAL:  Connect the included 5-pin captive screw connector to the 

AUDIO OUT

 port.

6.  OPTIONAL:  Connect the included 5-pin captive screw connector to the 

IR IN/OUT

 port.

7. 

OPTIONAL:  Connect the included 3-pin captive screw block to the 

RS-232

 port.

8. 

Connect the included power supply to the 

DC 48V

 connector and connect the power cord to an available 

electrical outlet.  Refer to 

Power (page 12)

 for more information.

HDMI 1

HDMI 2

HDMI 3

HDMI 4

HDMI 5

VOLUME

AT-UHD-SW-52ED

POWER

INPUT

S/PDIF OUT

RX TX

RS-232

LAN

FW

DC 48V

+

-

1

2

3

4

5

HDMI IN

HDMI OUT

HDBaseT OUT

AUDIO OUT

IR

L

R

P S

S

IN

OUT

Summary of Contents for ATLONA AT-UHD-SW-52ED


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands