22
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
RS-232 / IP Commands
Manufacturer, Products, Models
- Select the make and model of the display for control.
Commands have been programmed into the unit for a wide range of products. If the current
display is not found within the database, use generic and manually adjust the command fields.
Repeat Command
- Enable Status to repeat the commands. Default repeat number is 2 and can
be adjusted from 2 to 4 times.
Commands: On/Off/Volume/Mute
- These fields will automatically be filled with the correct
command when selecting a manufacturer and product from the drop down menus. If manually
entering the commands, type them into the fields next to the command name.
Send
- Use this button to send the command to the display, this can be used while manually
typing the commands to ensure the commands are correct.
Save
- Save the commands to the webGUI. Manufacturer, products, and Model will revert to
Generic but the commands will be saved from the previously selected and saved Manufacturer,
products, and model selection.
Revert
- Sets the commands back to the previously saved settings.
IP Mode
Non-login: Does not require a username and password when using TCP/IP to control the
display
Login: Requires a username and password to control the display through TCP/IP
IP Address & Port - Set to match the display’s static IP
Username & Password - Required when in login mode
Save - Saves the IP settings for accessing the controlled device
