AT-UHD-CLSO-601
12
DispRS
Turns the display on or off using the RS-232 (serial) protocol. Unlike the
command, this command will wait
until the warm-up and cool-down timers have expired. Refer to the
and
commands for
setting these timers. on = power on the display, off = power-off the display. Use the sta argument to display the
current setting.
EQB
Adjusts the bass equalizer to the specified level. Levels can also be increased or decreased by increments of 1.
When incrementally increasing or decreasing the current bass level, do not specify the parentheses as part of the
command. Refer to the examples below.
Syntax
DispRS
Syntax
EQB(X)
Example
DispRS on
Example
EQB(-10)
EQB+
// increment bass by 1
EQB-
// decrement bass by 1
Feedback
DispRS on
Feedback
EQB(-10)
EQB+
EQB-
Parameter
Description
Range
X
Value
on, off, sta
Parameter
Description
Range
X
Value
-96 ... 120, +, -
Commands
