AT-UHD-CLSO-601
13
EQT
Adjusts the treble equalizer to the specified level. Levels can also be increased or decreased by increments of 1.
When incrementally increasing or decreasing the current treble level, do not specify the parentheses as part of the
command. Refer to the examples below.
Syntax
EQT(X)
Example
EQT(-10)
EQT+
// increment treble by 1
EQT-
// decrement treble by 1
Feedback
EQT(-10)
EQT+
EQT-
Parameter
Description
Range
X
Value
-96 ... 120, +, -
Commands
HDCPSet
Set the HDCP reporting mode of the specified HDMI port. Some computers will send HDCP content if an HDCP-
compliant display is detected. on = reports to the source device that the display (sink) is HDCP-compliant, off =
reports to the source device that the display (sink) is not HDCP-compliant (HDCP content will not be sent), auto =
uses the attributes of the display device to accept or not accept HDCP content. Setting this value to
off
does
not
decrypt HDCP content. Use the
sta
argument to display the current setting.
Syntax
HDCPSetX [Y]
Parameter
Description
Range
X
HDMI port
1 ... 4
Y
Mode
on, off
Example
HDCPSet 1 on
Feedback
HDCPSet 1 on
