Panduit Atlona AT-JUNO-451-HDBT Manual Download Page 36

Page: 36 / 49

AT-JUNO-451-HDBT

The Web GUI

Output 1

Mutes or un-mutes the HDMI audio output. Set the

Output

toggle to

OFF

to disable HDMI audio on the output.

The default setting is

HDMI Input audio breakout

Sets the audio source used by the

OPTICAL

port on the unit. The default setting is

SPDIF

Toslink

Click this toggle to enable or disable the

OPTICAL

port on the back panel. By default, this option is set to OFF

(disabled).

Audio

Scaler

Setting

Description

SPDIF

The HDMI output audio will also be output using the

OPTICAL

port on the back of

the unit.

ARC

Audio being returned from the display, over ARC, will be output on the

OPTICAL

port

on the AT-JUNO-451-HDBT. It should be noted that the audio is limited to formats

supported by the SPDIF output, such as PCM, Dolby® Digital, and some formats of

DTS. Lossless audio formats, such as Dolby TrueHD and DTS-HD Master Audio™,

are not supported by ARC or SPDIF.

Scaler Pass-Through

Click this toggle switch to enable or disable the scaler pass-through feature. When set to the

position, no scaler

processing is used and the output resolution / timing will be the same as the input source. When disabled (

OFF

4K content will be down-scaled to 1080p. By default, this feature is set to the

OFF

position, which provides scaling

capability.

Summary of Contents for Atlona AT-JUNO-451-HDBT


















































Search results

Summary of Contents for Atlona AT-JUNO-451-HDBT

Reviews:

Related manuals for Atlona AT-JUNO-451-HDBT

Brands by name

Popular brands

Panduit Atlona AT-JUNO-451-HDBT, Manual

Search results

Summary of Contents for Atlona AT-JUNO-451-HDBT

Reviews:

Related manuals for Atlona AT-JUNO-451-HDBT

Brands by name

Popular brands