Panduit Atlona AT-JUNO-451-HDBT Manual Download Page 15

Page: 15 / 49

AT-JUNO-451-HDBT

Installation

3. Execute the

IPStatic

command. This command requires three arguments: the desired IP address of the

AT-JUNO-451-HDBT, the subnet mask, and the gateway address. All arguments must be entered in dot-

decimal notation. The following is an example:

IPStatic 192.168.1.112 255.255.255.0 192.168.1.1

• Setting DHCP mode

1. Connect to the AT-JUNO-451-HDBT using RS-232 or Telnet.

2. At the command line, execute the

IPDHCP

command using the

argument, as shown. All characters are

case-sensitive.

IPDHCP on

Once DHCP is enabled, the unit will be assigned an IP address by the DHCP server (if present).

The

System page (page 40)

, in the web GUI, allows the AT-JUNO-451-HDBT to use either DHCP or static IP mode.

In order to access the web GUI, the IP address of the AT-JUNO-451-HDBT must be known. Refer to

Introduction to

the Web GUI (page 32)

1. Open the desired web browser and enter the IP address of the AT-JUNO-451-HDBT.

2. Log in, using the required credentials. The factory-default username and password are listed below:

Username:

root

Password:

Atlona

3. Click the

System

tab.

4. Click the

IP Mode

toggle to switch between the

DHCP

and

STATIC IP

setting. When set to

STATIC IP

, the

Netmask

, and

Gateway

fields can be modified.

5. Click the

Save

button to save the changes.

IP address

Subnet mask

Gateway

Setting the IP Address using the Web GUI

Summary of Contents for Atlona AT-JUNO-451-HDBT


















































Search results

Summary of Contents for Atlona AT-JUNO-451-HDBT

Reviews:

Related manuals for Atlona AT-JUNO-451-HDBT

Brands by name

Popular brands

Panduit Atlona AT-JUNO-451-HDBT, Manual

Search results

Summary of Contents for Atlona AT-JUNO-451-HDBT

Reviews:

Related manuals for Atlona AT-JUNO-451-HDBT

Brands by name

Popular brands