AT-JUNO-451-HDBT
26
HDMI OUT
LAN
OPTICAL
RS-232
RX TX
S
IR IN
DC 5V
AT-JUNO-451-HDBT
INPUT
1
2
3
4
POWER
INPUT
FW
1
2
3
4
INPUT
AT-JUNO-451-HDBT
J
UNO
X
TM
Basic Operation
The following procedure will reset the AT-JUNO-451-HDBT to factory-default settings. The network IP mode will be
set to DHCP mode.
1. Make sure the unit is powered.
2. Simultaneously press and hold the
POWER
and
INPUT
buttons for more than 15 seconds.
3. Release both buttons.
4. The factory-reset process is complete.
Resetting to Factory Defaults
Using the Front Panel
Using the Web GUI
1. Open the desired web browser and enter the IP address of the AT-JUNO-451-HDBT.
2. Log in as the
admin
user with the required credentials. The factory-default username and password for the
admin user are listed below:
Username:
root
Password:
Atlona
3. Click the
System
tab.
4. Click the
Factory Default
button.
