AT-HDR-SW-51
43
Configuration and Management Interfaces
A/V Settings page
The
A/V Settings
page is divided into three sections:
Video
,
Audio
, and
HDCP
. The
Video
section provides
controls for switching modes and input selection. The
Audio
section provides options to control the output audio
volume and de-embedding. The
HDCP
section controls whether or not HDCP content is allowed to pass.
Input Selection
Click this drop-down list to manually select the desired input.
Setting
Description
Input 1
Sets
HDMI IN 1
as the active input.
Input 2
Sets
HDMI IN 2
as the active input.
Input 3
Sets
HDMI IN 3
as the active input.
Input 4
Sets
HDMI IN 4
as the active input.
Input 5
Sets
HDMI IN 5
as the active input.
Video
Auto Switch
Click this toggle switch to enable or disable Auto Switching. When enabled, the AT-HDR-SW-51 will automatically
switch to the another input, if the signal is disrupted on the currently active input.
Scaler
Click these toggle switches to enable or disable the scaler pass-through feature for the HDMI outputs. When set
to the
ON
position, 4K content will be down-scaled to 1080p. When set to the
OFF
position, the output resolution /
timing will be the same as the input source. The default setting is
OFF
.
