AT-HDR-SW-51
35
Device Operation
1. Log in to the web server.
2. Click
System
in the menu bar.
3. Click the
Telnet Login Mode
toggle switch. Set this toggle switch to
ON
to prompt for user credentials.
Set this toggle switch to
OFF
to bypass the request for user credentials request.
4. Click
Save
to commit changes.
1. Log in to the web server.
2. Click
System
in the menu bar.
3.
Enter the desired timeout value, in seconds. The following integer values can be specified:
0
-
60000
.
4. Click
Save
to commit changes.
Telnet Login Mode
Telnet Timeout
When a Telnet session is requested, the AT-HDR-SW-51 provides the option to prompt for user credentials or
bypass authentication before the Telnet session begins. This credentials prompt option can be enabled or disabled.
When prompting for user credentials, use the same login information required by the built-in web server.
If there is no activity within a specified amount of time, during a Telnet session, the session can automatically be
closed. By default, the AT-HDR-SW-51 will close a Telnet session after 300 seconds of inactivity. If this field is set
to
0
, then the timeout interval is infinite.
