Panduit ATLONA AT-HDR-SW-51 Manual Download

Page: 28 / 58

AT-HDR-SW-51

Device Operation

The AT-HDR-SW-51 provides the option of selecting a preset EDID. The following presets are available.

EDID Presets

1. Log in to the web server.

2. Click

EDID

in the menu bar.

3. Locate the

EDID Settings

section.

4. Click the drop-down list, next to the port that is connected to the source device, and select the desired EDID

preset. For example, if

HDMI IN 1

is connected to the source, click the

Input 1

drop-down list and select the

desired EDID. The source device will use the selected EDID to determine all supported video and audio formats.

IMPORTANT:

If problems are encountered when using an EDID preset, it is recommended

that the input be set to

Connected Display

. Not all displays will support all video and audio

formats in a given EDID preset.

EDID

Description

Connected Display (Default)

Uses the downstream EDID of the connected display

ATL 4K60 MCH

3840 x 2160 (UHD) with multichannel audio support

ATL 4K60 PCM MCH

3840 x 2160 (UHD) with PCM multichannel audio support

ATL 1080P MCH

1920 x 1080p with multichannel audio support

ATL 1080P 2CH

1920 x 1080p with two-channel audio support

ATL 1080P DD

1920 x 1080p with Dolby

™

Digital audio support

ATL 1080P DVI

1920 x 1080p for DVI displays

ATL 720P DD

1280 x 720p with Dolby

™

Digital audio support

ATL 720P 2CH

1280 x 720p with two-channel audio support

Summary of Contents for ATLONA AT-HDR-SW-51



























































Search results

Summary of Contents for ATLONA AT-HDR-SW-51

Reviews:

Related manuals for ATLONA AT-HDR-SW-51

Brands by name

Popular brands

Panduit ATLONA AT-HDR-SW-51, Manual

Search results

Summary of Contents for ATLONA AT-HDR-SW-51

Reviews:

Related manuals for ATLONA AT-HDR-SW-51

Brands by name

Popular brands