15
14
U S E R MA N UA L
PA N D O R A S MA R T V3
2. Turn the key in the ignition lock to the OFF position (the engine should still be running) and take
it out of the lock (skip this step for cars with a Start/Stop button).
3. Leave the car, close the doors.
4. Arm the system - the engine will be stopped. Now the system is ready to perform remote and
automatic engine start.
Automatic starts
The system allows configuring automatic engine start and stop conditions. Automatic starts can be
configured using the internet-service or mobile apps. The following conditions can be specified
for automatic engine starts: schedule, time period, engine temperature, voltage. The engine will be
stopped automatically after specified time or when the engine temperature reaches a specified value.
The engine can be also stopped by a user command.
!
a
uTomaTic
engine
sTarTs
and
sTops
by
TemperaTure
are
available
only
if
a
TemperaTure
sensor
is
connecTed
. r
emoTe
and
auTomaTic
engine
sTarTs
are
noT
available
if
The
hood
is
open
. a
fTer
Third
failed
consecuTive
aTTempT
of
auTomaTic
sTarT
all
subsequenT
auTomaTic
sTarTs
will
be
cancelled
unTil
arming
/
disarming
of
The
car
(
iT
doesn
’
T
affecT
aT
remoTe
sTarT
feaTure
).
Slave mode
This mode allows arming and disarming using original vehicle control – an original key, button/sensor
of a keyless access entry system.
Slave mode can be implemented using analog connections or a digital protocol of a vehicle
!
T
his
mode
is
disabled
by
defaulT
for
a
digiTal
proTocol
. m
ore
informaTion
on
loader
.
pandorainfo
.
com
. i
T
is
recommended
To
acTivaTe
The
«p
rohibiT
disarming
when
a
Tag
is
absenT
»
To
increase
securiTy
feaTures
of
The
s
lave
mode
.
Owner authorization devices and functions
Authorization devices
Authorization devices are Bluetooth devices paired with the system (radio tags, remote control
D030, mobile phone with the app). The devices are used to recognize an owner in the radio
coverage zone of the base unit to arm/disarm the system (Hands Free mode) and to implement
immobilizer or Anti-Hi-Jack functions.
!
i
nsTall
The
beeper
if
you
use
auThorizaTion
devices
.
Hands Free mode
This mode is used for automatic arming/disarming
when an owner with an authorization device is
distancing or approaching a vehicle.
!
T
his
mode
is
disabled
by
defaulT
. i
T
is
required
To
make
addiTional
seTTings
using
p
andora
a
larm
s
Tudio
To
use
This
mode
. q
uick
access
commands
To
manage
h
ands
f
ree
mode
: 223* - a
cTivaTe
h
ands
f
ree
arming
, 224* - a
cTivaTe
h
ands
f
ree
disarming
, 222* - d
eacTivaTe
all
h
ands
f
ree
.
Immobilizer mode
This mode is used to recognize an owner using authorization devices when the system is disarmed.
When turning on the ignition, the base unit performs a search for authorization devices in the
radiocoverage zone. If there is no any authorization device in the radio coverage zone, the system
will block the engine. Engine blocking will occur immediately or at the time a motion sensor detects
movement, it depends on the system settings. When an authorization device appears in the coverage
zone, the system will exit blocking mode and will continue to work in normal mode.
!
T
his
mode
is
enabled
by
defaulT
. i
T
is
required
To
make
addiTional
connecTions
for
This
mode
.
ANTI-HI-JACK-1/2 modes
The Anti-Hi-Jack modes help to prevent aggressive seizure of a vehicle when authorization in case
of disappearance of authorization devices from the radio coverage zone when system is disarmed.
ANTI-HI-JACK-1 mode – The base unit checks if an authorization device is in the radio coverage zone
each time when ignition is on and a door is opened/closed.
ANTI-HI-JACK-2 mode – The base unit constantly checks if an authorization device is in the radio
coverage zone when ignition is on.