21
20
U S E R MA N UA L
PA N D O R A S MA R T V3
CONTROL THE SYSTEM BY A PHONE
!
f
or
The
correcT
operaTion
of
The
gsm
funcTions
,
an
owner
should
moniTor
The
sTaTus
/
balance
of
The
sim
card
insTalled
in
The
sysTem
. i
f
The
sim
card
is
blocked
or
defecTive
, gsm
funcTions
of
The
sysTem
will
be
unavailable
.
Call the system’s phone number. When it answers, enter a command code
*It is required to enter the «Secret PIN-code» after dialing a command
DTMF commands
For example: To have simple access to engine start function, create a new contact in the contact list
of your phone, name it «Engine start», for instance, and add the number in the following format:
1
1
0
0
0
0
*
*
1
1
2
2
3
3
*
*
5
5
1
1
*
*
Tow truck mode
Request GSM balance
Start engine/prolong engine running
3
3
2
2
1
1
*
* Stop engine
3
3
3
3
3
3
*
* Additional function F via CAN
5
5
0
0
0
0
*
*
4
4
5
5
6
6
*
*
6
6
5
5
4
4
*
*
7
7
5
5
3
3
*
*
Request GPS coordinates
Switch on additional channel
Switch off additional channel
#
#
9
9
*
*
*
*
1
1
5
5
9
9
*
*
Return to previous menu state
Repeat the last message
Silent arming
Help
0
0
0
0
*
*
0
0
1
1
*
*
Unlocking trunk
Silent disarming
1
1
*
*
Arming
0
0
*
*
Disarming
Connect to server
2
2
5
5
8
8
*
* System information
1
1
5
5
6
6
*
*
6
6
5
5
1
1
*
*
Switch on engine heater
Switch off engine heater
6
6
6
6
6
6
*
*
9
9
9
9
9
9
*
*
Activate Engine blocking
Deactivate engine blocking*
9
9
9
9
8
8
*
*
8
8
8
8
8
8
*
*
Deactivate authorization devices*
4
4
2
2
4
4
*
* Fuel level calibration
Activate authorization devices
2
2
2
2
2
2
*
* Disable HandsFree
2
2
2
2
3
3
*
* Enable HandsFree arming
2
2
2
2
4
4
*
* Enable HandsFree disarming
2
2
2
2
5
5
*
* Enable HandsFree disarm only during remote start
7
7
8
8
9
9
*
* Enable automatic engine start
9
9
8
8
7
7
*
* Disable automatic engine start
2
2
9
9
7
7
*
* End call
5
5
5
5
1
1
*
* Activate Service mode*
5
5
5
5
2
2
*
* Deactivate service mode
+XXXXXXXXXXX,123*,297*
where
«+XXXXXXXXXXX» – the system phone number,
«,» - pause is a feature of the phone (can be displayed as the «P», see the instructions of the phone),
«123*» - remote engine start DTMF command,
«297*» - end call DTMF command.
Contact can be added as a speed dial to any of the free button.
To have simple access to engine start function a phone other than the main owner’s phone, create
contact in the following format:
+XXXXXXXXXXX,1234,123*,297*
where «1234» – guest PIN-code.
Activate/Deactivate service mode
1. Call the system number. Wait for the answer.
2. Turn on the ignition, an authorization device (a radio tag, a Bluetooth remote control, a paired
mobile phone with the app installed) must be in the coverage zone, enter the «Immobilizer PIN-code»
(if the «Code immobilizer» function is enabled).
3. To activate service mode, dial the 551* DTMF command — «Activate service mode», then enter
the «Secret PIN-code» from the owner’s personal card.
To deactivate service mode, dial the 552* DTMF command — «Deactivate service mode».
Voice help
The system has a voice help menu. During a voice call to the system, dial 9* and listen to the
information about system control commands.
To end the session, hang up the phone.
Repeat the last message
To repeat any message, press* during a voice call to the system.
Arming/Disarming
1. Call the system number. Wait for the answer.
2. Dial 1* to arm, and 0* to disarm.
For silent arming dial 10* or 00* for silent disarming.
3. The system will confirm arming/disarming.
To end the session, hang up the phone.