background image

17

User manual

Pandora DXL-0050L service-security system

If the engine was started using remote or automatic start, remote engine start command will extend 

its operation period by 10 minutes. This procedure can be repeated multiple times.

Automatic engine start

The system allows setting up modes of automatic engine start and stop. Synchronized real-time 

clock on the remote and base unit and other autonomous system settings allow many engine start 

options without needing to have the remote in command radio range. 

WARNING!

ONLY ENABLE REMOTE START IF YOUR LOCAL LEGISLATION ALLOWS DRIVERLESS 

CARS TO HAVE WORKING ENGINE.

2

5

8

4

7

3

6

1

select 

with presses

On

Off

set autostart

hours   minutes

set temperature

increase  decrease

set heating time

On

Off

On

Off

daily timer

autostart by temperature

periodic heating

increase  decrease

set stop temperature

On

Off

engine stop by temperature

increase  decrease

Save selected settings

Cancel selected settings

Return to the beginning of settings

NOTE: If you have not saved new settings, remote and automatic 

engine start settings will remain the same as before.

Automatic start and engine work conditions programming is done using LCD remote. Select 

 

icon by pressing 

 button and press   button to enter remote start functions menu. This menu has 

8 sub-levels that can be rotated by pressing  . Sub-level values are changed using   and  . 

When changing settings are done, the values should be saved. To do this, move to the ‘send’ sub-

level using 

 presses. Press   button to save selected settings. The changes will be sent to the base 

Summary of Contents for DXL-0050L













































Reviews: