Pando PI-TEP, Installation Manual

Page: 73 / 89

INOXPAN S.L.
EN
6
Control panel
Pause/
Recal
key
On/Off key Locking key
Special cooking
function key
Power selection zone
“Slider” (front zone)
Power selection zone
“Slider” (rear zone)
Timer keys Power display Timer
display
Bridge
display
Timer
display
DESCRIPTION OF THE APPLIANCE
Technical characteristics
Total Power Position of the heating zone Nominal Power
2800 W 2 zones Ø145 mm 2 x 1400 W
USE OF THE APPLIANCE
Display
D isplay D esignation Description
0 Zero The heating zone is activated.
1…9
Booster level Selection of the cooking level.
E Error message Electronic failure.
H Residual heat The heating zone is hot.
I Stop&Go The hob is in pause.
Ventilation
The cooling system is fully automatic. The cooling fan starts at a low speed when the calories
generated by the electronic system reach a certain level. The ventilation starts its high speed
level when the hob is intensively used. The cooling fan reduces its speed and stops automatically
when the electronic circuit has cooled down enough.
I