Pando E-390, Installation Manual

Page: 155 / 180

•
To stop the cooking time:
Action Control panel Display
Select the Timer Press key [ ] Timer display on
Stop the time Press key [ - ] from the timer [ 000 ]
If several timers are activated, repeat the process.
•
Egg timer function:
Egg timer is an independent function. It stops as soon as a heating zone starts up.
If the egg timer is on and the hob is switched off, the timer continues until time runs out.
Action Control panel Display
Activate the hob Press key [ ] for 2 sec. [ 0 ]
Select the Timer Press [ 000 ] [ 000 ]
Decrease the time Press key [ - ] from the timer [ 60 ] to 59, 58...
Increase the time Press key [ + ] from the timer Time increase
After a few seconds, the [ min ] display stops with blinking.
The time is confirmed and the timer starts.
•
Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer displays blinking [ 000 ] and a sound
rings.
To stop the sound and the blinking, press the key [ - ] and [ + ].
Automatic cooking
All the cooking zones are equipped with an automatic cooking device. The cooking zone starts at
full power during a certain time, and then reduces automatically its power on the pre-selected
level.
•
Start-up:
Action Control panel Display
Power level selection
slide on the “SLIDER“ to [ 7 ]
[ 7 ] is blinking with [ A ]
(for example « 7 ») and stay 3s
•
Switching off the automatic cooking:
Action Control panel Display
Power level selection
slide on the “SLIDER“
[ 0 ] to [ 9 ]
Stop&Go function
This function brakes all the hob’s cooking activity temporarily and allows restarting with the same
settings.
•
Start up/stop the pause function:
Action Control panel Display
Engage pause press [ II ] 2s [ II ] and control light on
Stop the pause press [ II ] 2s previous settings
39
EN