8
Replacing the Remote Control Battery
1.
Hold the remote control with the buttons facing down.
2.
Push and hold the small release tab while pulling the battery tray out.
3.
Replace the “CR2025” Lithium battery on the tray with the positive (+)
side facing up.
4.
Push the tray back in until it clicks into place
.
Using the Digital Photo Frame’s Screens
You access the Digital Photo Frame’s functions with a series of screens, and
control them with either the buttons on the top of the frame or on the remote
control. The Card Selection Screen
Use the Card Selection menu to choose between memory cards and the
built-in memory.
1. To display the Card Selection screen, simply press
EXIT
on the
remote control till you reach this screen.
2. Press the LEFT and RIGHT arrows to select the desired memory
card, or built-in memory. Only available memory cards will be
highlighted. Press
Enter
to make the selection.
The Mode Selection Screen
The Mode Selection Screen shows after you choose the memory source.
Use it to choose the type of files or application you wish to display or open.
