P
a
n
chromatic
Eumig P 25
User Manual
Loading the film
The loaded reel is put on the top spool arm making sure
when a projector for 8 mm film is being used, that the
little pin on the spool axle engages itself in one of the
holes provided for this purpose in the reel. The 16 mm
type of projector is suitable for projection of films perfo-
rated either on both sides of one side only. Lead the
film over the small guide roller and down below the top
sprocket
1
(fig.A), then pass it between the 2 guide
plates, when a gentle upward tension will engage the
film with the sprocket teeth. Open the film gate by
turning the lever
5
(fig.A) under the lens mounting, the
lens having been somewhat screwed out, if necessary,
and insert the film sideways into the gate and then
close the gate. The film is then passed around the bot-
tom sprocket
9
(fig.A), under the second guide roller,
onto the empty film spool. A loop must be left between
the top socket and the gate, while another loop is left
before passing the film around the bottom socket.
Projection
Having arranged the projector at an appropriate dis-
tance from the screen, switch on by the lever
13
(fig.A)
and focus by turning the lens. Adjust the speed by lever
17
(fig.A) until all flicker is removed. If parts of two pic-
tures are seen on the screen, framing is effected by
turning the lever
11
(fig.A) Stills, by turning the knob
21
(fig.A), may be shown for a longer of shorter space
of time, according to the type of film used, an adequate
cooling of the film being effected by a newly designed,
highly efficient fan. Moreover, a heat absorbing filter is
provided for the projection of still pictures.
