P
a
n
chromatic
Eumig P 25
User Manual
Mounting of the spool arms
Open these out, engage the two projections in the slots
in the body-work of the projector and tighten up the
screw
12
(fig.B).
Be careful that the spool arms are on the same side of
the machine as the corresponding driving pulleys, as
can be seen in fig.B.
Now add the spring belts as shown in the illustration on
page 4.
It is to be noted, that, contrary to that illustration, the
wire belts must be crossed both for projection and re-
wind, in the case of the projector type for 9.5 mm films
Fig.A
