P
a
n
chromatic
Eumig S810 S810D S810D Lux
User Manual
Page 7
Before connecting to the mains supply
The voltage and frequency of your projector must match those indicated on
your mains supply meter.
a)
Voltage
If the mains voltage does not match. unscrew the fixing screws
A
, remove the
back, pull off the red plug
B
towards the left and attach it to the correct terminal,
Some supply systems are liable to carry temporary overvoltage’s which can lead
to premature projection lamp failure. Where this arises, it is best to adjust the
projector to the next higher voltage setting (for instance 230 volts Instead of
220 volts), This also extends the burning life of the lamp while slightly reducing
the light output.
b)
Frequency
The frequency setting can be changed only on the special version of the
projector. To do this, pull off the blue plug
C
and
attach it to the correct terminal.
Move the lever D so that the appropriate frequency indication appears
horizontal.
c)
Transport Lock
