P
a
n
chromatic
Eumig S810 S810D S810D Lux
User Manual
Page
21
You can, also feed the projector output into an external amplifier. Plug this into
the line output. Check that the connecting lead is correctly wired
The EUMIG Universal Re-recording Lead
Order No 790.260/2
Unfortunately, audio units do not have standardised output sockets, nor are
connecting leads always wired the same way. EUMIG has therefore produced a
universal re-recording lead to connect practically any audio source to your
sound movie projector. With the adapters provided you can plug the lead into
almost any audio unit on the market. The lead is easy to handle:
1
Select the appropriate adapter and plug It into the audio unit 1.0 be used.
2
Connect the lead to the projector.
3
Plug the other end of the lead into the adapter.
4
If the projector does not record properly (too low a sound level or
distorted sound) due to a mismatch with the circuit of the audio unit, try
plugging the lead into the adapter with reversed polarity.
5
If the recording level is still too low you should the reverse polarity plug
between the projector and recording lead.
