background image

 

I

Safety 

  Warning symbols for safe usage 

Each symbol describes things to be observed to prevent you and other personnel from hazardous 

conditions or damage to property. 

The  followings  explains  harzardous  conditions 

or  damages  that  are  classi-fied  into  the 

following three levels.

 

The following symbols indicates things to be 

observed. 

 

 

Things  that  MUST  NOT  be 

performed. 

A  hazardous  situations  including  death  or  serious 

personal injury is imminent. 

 

 

Things that MUST be performed. 

The  potential  for  a  hazardous  accident  including 

death or serious personal injury is high. 

 

 

 

 

Things attention must be paid to. 

The potential for hazardous accident including light 

personal injury and/or the potential for property 

damage are high. 

Disclaimer

 

Panasonic Welding Systems

Tangshan

 

Co., Ltd., (hereinafter called “PWST”) and its affiliates (including 

any subcontractor, sales company or agent) shall not assume or undertake any responsibility or liability of 
the followings: 
 

•Any  problem 

arising out of, or directly or indirectly attributable to,the failure of user to carry out those 

normal maintenance, normal adjustment and periodical check of this product. 

 

•Any problem arising out of any force majeure, including but not limited to, act o

f god. 

 

•Any  malfunction  or  defect  of  this  product  that  is  directly  or  indirectly  the  result  of  any  malfunction  or 

defect of one or more related parts or products that are not supplied by PWST. Or any problem arising 
out  of,  or  directly  or  indirectly  attributable  to,  the  combination  of  this  product  with  any  other  product, 
equipment, devices or software that is not supplied by PWST. 

•Any problem arising out of, or directly or indirectly attributable to,user’s failure to strictly carry out or follow 

all of the conditions 

and instructions contained in this instruction manual, or user’s misusage, mishandle, 

operational miss or abnormal operation. 

 

•Any problem arising out of this product or the use of it, the cause of which is other than the foregoing but 

is also not attributable to PWST. 

 

•Any claim of a third party that this product infringes the intellectual property rights of such third party that 

are directly or indirectly caused by user’s use of this product and relate to the method of production.

 

 

The description of this manual is based on the contents as of July, 2019. 

The contents of this manual are subject to change without further notice. 

English version is the original instructions. 

Summary of Contents for YC-300WY















































Reviews: