Panasonic YC-300WY, Operating Instructions Manual

Page: 11 / 46

PREPARATION
(1) Capacity of power supply facility and connecting cable
Item Model YC-
300/
500W
Y
4
/500WX4
Supply voltage
V
415
Phases Three-phase
Faci1ity
kVA
40 or more
Primary 1ine current
A
approx.36.5
Input cable
mm
2
14 or more
Output cable
mm
2
60 or more
N.B.
• Turn off the switch of the switch box when connection cable.
• Provide a switch box for every welder and use a specified fuse.
• Power supply cable should be 14mm
2
or more in sectional area if its length is more than
10m.
• If an engine generator is used, it should be provided with an inverter of capacity from
three to five times of that of the welder with compensating winding for thyristor equipment.
(2) Required equipments and materials
Prepare the following equipments and materials to perform welding work.
[TIG welding]
TIG welding torch (purchased separately)
Argon gas for welding (purity over 99.9%) (purchased separately)
Argon gas regulator (purchased separately)
Base metal side cable (purchased separately)
- 3 -