33
Carefully read the “Precautions” section and follow all of its instructions.
Turn the microphone OFF before replacing the batteries.
In the following cases, the dry-cell batteries are depleted or remaining capacity of the
rechargeable batteries is insufficient. Replace the dry-cell batteries with new ones or
recharge the rechargeable batteries.
• The status indicator lights red
• The status indicator does not light up
memo
Important
●
Do not touch the battery poles with your hands. Doing so may cause
connection problems or noise. If the battery poles become dirty, clean them
with a dry, soft cloth.
●
Even when the power is turned OFF, batteries left inside the product will
slowly be drained. Remove the batteries when you are not using the
microphone for an extended period of time, as failing to do so may cause
battery leaks.
SENS L
/H
SET
REG
PTT OFF/ON
INP
UT LE
VEL ME
TER OFF/ON
N/A
1
2
3
4
* This illustration shows the WX-ST600P.
Battery cover
A
3
2
4
Power switch
1
1
Confirm that the power switch is set to “OFF”.
2
Remove the battery cover
Press on the portion labeled as on the bottom of the battery cover and slide the
cover in the indicated direction to remove it.
Replacing the batteries
