15
1
Power switch [OFF/ON]
Turns the microphone ON/OFF. It is a slide switch.
2
Charge indicator (USB)
Shows the charge status.
On (red)
: The Ni-MH batteries inside the product are being recharged via USB.
Blinking (red) : Charging error (primary battery / battery short / temperature
abnormality detected / battery not inserted).
Off
: Charging completed, or power supplied via USB to this product, but
there are no batteries inside.
3
Talk indicator
Indicates the talk status.
On (green)
: Talking
On (red)
: Not talking
Blinking (red) : Talking and the receiver channel is muted
Off
: No signal (outside of the connection area between microphone and
antenna) or microphone unpaired with a receiver
4
Status indicator
Shows the battery status.
On (green)
: Power ON
On (orange)
: Power ON (less than one hour of battery runtime remaining)
On (red)
: Battery almost depleted (recharge or exchange the batteries)
Off
: Power OFF
Blinking (green) : Connected to the settings support software (while the simplified
spectrum analyzer and slot monitor are running)
Blinking (orange) : No signal (outside of the connection area between microphone and
antenna)
Pairing mode
Blinking (red) : Microphone unpaired or failed to pair with a receiver
●
See “Pairing” (page 24).
Alternately blinking (orange/green)
: Confirming pairing
5
Microphone connector (WX-ST600P only)
The connector into which the gooseneck microphone is plugged.
6
Microphone unit (WX-ST700P only)
Collects audio.
7
Talk indicator
Indicates the talk status.
On (green)
：
Talking
Off
：
Not talking or no signal (outside of the connection area between
microphone and antenna), or microphone unpaired with a receiver
