25
Q
Pairing with the WX-SR202P / WX-SR204P / WX-SE200P
(wireless connection)
Pair the microphone to a wireless antenna via a wireless connection. Perform the pairing
within the connection range of the wireless antenna connected to the wireless receiver /
extension receiver to which you want to pair the microphone.
1
Remove the battery cover
Press on the portion labeled as on the bottom of
the battery cover and slide the cover in the
indicated direction to remove it.
2
Set the wireless receiver / extension receiver to pairing mode
Make sure that the [POWER] indicator on the wireless receiver / extension receiver
lights green, then press for at least two seconds the [REG] button of the channel to
which you want to pair a microphone.
When the wireless receiver / extension receiver is in pairing mode, the [REG] indicator
of the channel whose [REG] button has been pressed will blink orange. Pairing mode
lasts for 30 seconds, so pair the microphone within this time.
Register button
Power indicator
Register indicator
* This illustration shows
the WX-SR202P.
SENS L/H
SET
REG
PTT OFF/ON
INPUT LEVEL METER OFF/ON
N/A
1
2
3
4
A
