18
Installation
Wireless interference
●
Devices emitting strong radio noise may interfere with the repeater and make it unusable
when placed near it.
Ensure there is enough space between the repeater and such devices to avoid
interference.
(Note: Place the repeater at least 30 m (98.4 ft) away from cellular base stations)
●
In the following case, contact a retailer beforehand to confirm suitability of the
environment for use with the repeater:
• Using the repeater on a wagon trolley
●
As the repeater uses the same frequency (1.9 GHz) as other DECT devices such as
cordless phones, the maximum number of usable All-In-One Headsets and Belt Packs
may be limited.
Power
●
The repeater does not have a power switch. Unplug the USB cable to turn OFF the
repeater. If the cable cannot easily be unplugged because of the way in which the
repeater is installed, unplug the USB power adaptor connected to the repeater.
Static electricity
●
Before installing the repeater, discharge yourself by touching a grounded metal object in
order to avoid damage caused by static electricity buildup.
Tightening screws
●
Tighten screws straight up. After tightening the screws, make visual confirmation that
they are straight and well-tightened.
●
Do not use impact screwdrivers or electric screwdrivers, as even the ones with clutches
make it difficult to control the torque, and risk damaging the mounting unit.
Avoid subjecting the repeater to shocks
●
Protect the repeater from strong hits or shocks. These may cause damage to the
repeater.
USB cable
●
USB cable is not included with the repeater.
Use a USB cable with a supply current of 1 A or more. There is a maximum cable length
depending on the connection method. See “Connections” (page 24) for details.
WX-CR480P_PUQX1029ZAV1_OI_en-fr.indb 18
2021/11/08 13:25:15
