21
■
Operation Mode 6 (Double Drive Through with Area Expansion)
By adding two WX-CT2030 Transceivers (x 1 to the assistant area and x 1 to the manager area), you can expand the commu-
nication areas of Operation Mode 5.
• The number of users who can simultaneously communicate in the TALK / PAGE mode depends on the total number of
transceivers (WX-CC2010 x 1 + WX-CT2030 x
∗
).
Note:
"
∗
" is the number of WX-CT2030.
• Communication Area A covers Menuboard A, and Communication Area B covers Menuboard B.
• The users can switch the communication between a customer at Menuboard A/B with the A/B channel selection button.
(Refer to the operating instructions of WX-CT2020 Order Taker Unit or WX-CH2050 All-in-One Headset.)
Note:
Communication is not established soon after Communication Area Lane A/B is switched.
Speak to the customer a few seconds after pressing the A/B channel selection button.
WX-CC2
010
TRANSC
EIVER
MONITO
R
1
2
3
4
ULTRAPLEX
II
POWER
VEHICLE
PRESENT
DNR
A
B
3.05 m {10 ft.}
or more
3.05 m {10 ft.}
or more
WX-CC2010
(Lane A)
WX-CT2030
w
*
(Lane B)
WX-CT2030
e
(Lane A)
WX-CT2030
r
(Lane B)
Keep the distance of 30.48 m {100 ft.} or more between (1) and (2).
(1): WX-CC2010 / WX-CT2030
w
(2): WX-CT2030
e
/
r
: Communication Area Lane A
WX-CT2020 / WX-CH2050 in this area can
receive the transmission signals from WX-CC2010 / WX-CT2030 (Lane A).
: Communication Area Lane B
WX-CT2020 / WX-CH2050 in this area can
receive the transmission signals from WX-CT2030 (Lane B).
*
w
shows the transceiver No.
It is the same as TRANSCEIVER jack No.
of WX-CC2010.
: Non-communication Area
Center Module Dip Switch Setting
[D
·
THROUGH]:
DDT
[MANAGER]:
OFF
WX-CT2020 / WX-CH2050 Dip Switch Setting
[D
·
THROUGH]:
DDT
[MANAGER]:
OFF
[Role Assignment]:
Assistant
[Area Expansion]:
Expansion
