20
■
Operation Mode 5 (Double Drive Through)
This operation mode can be applied for a Double Drive Through composition.
• The number of users who can simultaneously communicate in the TALK / PAGE mode depends on the total number of
transceivers (WX-CC2010 x 1 + WX-CT2030 x
∗
).
Note:
"
∗
" is the number of WX-CT2030.
• Communication Area Lane A covers Menuboard A, and Communication Area Lane B covers Menuboard B.
• The users can switch the communication between a customer at Menuboard A/B with the A/B channel selection button.
(Refer to the operating instructions of WX-CT2020 Order Taker Unit or WX-CH2050 All-in-One Headset.)
Note:
Communication is not established soon after Communication Area Lane A/B is switched.
Speak to the customer a few seconds after pressing the A/B channel selection button.
WX-CC2
010
TRANSC
EIVER
MONITO
R
1
2
3
4
ULTRAPLEX
II
POWER
VEHICLE
PRESENT
DNR
DNR
A
B
WX-CC2010
WX-CT2030
w
*
3.05 m {10 ft.}
or more
Center Module Dip Switch Setting
[D
·
THROUGH]:
DDT
[MANAGER]:
OFF
WX-CT2020 / WX-CH2050 Dip Switch Setting
[D
·
THROUGH]:
DDT
[MANAGER]:
OFF
[Role Assignment]:
Assistant
[Area Expansion]:
Normal
: Communication Area Lane A
WX-CT2020 / WX-CH2050 in this area can
receive the transmission signals from WX-CC2010.
: Communication Area Lane B
WX-CT2020 / WX-CH2050 in this area can
receive the transmission signals from WX-CT2030.
*
w
shows the transceiver No.
It is the same as TRANSCEIVER jack No.
of WX-CC2010.
: Non-communication Area
