background image

-41-

2. For fine adjustment of the ATW, press the CAM

(SET) key. The ATW fine adjustment menu appears
on the monitor screen.

3. Move the cursor to RET by using the joystick and

press the CAM (SET) key to return to the SET UP
menu.

(2) Automatic White Balance Control Mode

(AWC)

1. Move the cursor to WHITE BAL and select AWC 

PUSH SET by using the joystick.

2. Press the CAM (SET) key to start the white balance

setup. PUSH SW is highlighted to indicate that
white balance is being set.

3. PUSH SW returns to normal when balance setting

is completed.

4. For fine adjustment of the AWC, move the cursor to

AWC and press the CAM (SET) key. The AWC fine
adjustment menu appears on the monitor screen.

5. Move the cursor to RET by using the joystick and

press the CAM (SET) key to return to the SET UP
menu.

Auto Focus Setting (AF MODE)

The camera adjusts the focus automatically by sensing
the centre of the picture.

MANUAL:

Auto-focus is activated only when the AF key

on the controller is pressed.

AUTO:

Auto-focus is activated automatically while a

manual pan, tilt or zoom operation is pe

The factory default setting is AUTO.

Note:

The auto focus lens may not function properly in
the AUTO mode under the following conditions.

1. Dirt or water on window glass

The auto focus may focus on the dirt or water.

2. Low lighting or illumination
3. Bright objects or high intensity objects
4. Single color object such as a white wall or fine

felt

5. No centre objects and sloping objects
6. Far and near objects on the screen

Electronic Zoom (EL-ZOOM)

The electronic zoom magnifies a scene 5 times. With a
10-time optical zoom lens, the camera is capable of 50-
time zoom.

1. Move the cursor to EL-ZOOM and select ON or

OFF by moving the joystick to the right or left, and
then press the CAM (SET) key.
The factory default setting is ON.

ON:

5-time electronic zoom is available with the

ZOOM switch on the controller.

OFF:

The electronic zoom function is not used.

      **  ATW  **

R

B

RET

••••|••••
-       +
••••|••••
-       +

      ** SET UP **
CAMERA ID    ON 

O

ALC/MANUAL   ALC 

O

SHUTTER      OFF
AGC          ON(MID)
SYNC         INT
WHITE BAL    AWC

PUSH SET

AF MODE      MANUAL
EL-ZOOM      ON
SENS UP      OFF
MOTION DET   OFF
RET     SPECIAL 

O

      **  AWC  **

R

B

RET

••••|••••
-       +
••••|••••
-       +

      ** SET UP **
CAMERA ID    ON 

O

ALC/MANUAL   ALC 

O

SHUTTER      OFF
AGC          ON(MID)
SYNC         INT
WHITE BAL    ATW 

O

AF MODE      MANUAL
EL-ZOOM      ON
SENS UP      OFF
MOTION DET   OFF
RET     SPECIAL 

O

      ** SET UP **
CAMERA ID    ON 

O

ALC/MANUAL   ALC 

O

SHUTTER      OFF
AGC          ON(MID)
SYNC         INT
WHITE BAL    ATW 

O

AF MODE      MANUAL
EL-ZOOM      ON
SENS UP      OFF
MOTION DET   OFF
RET     SPECIAL 

O

Summary of Contents for WVNS324 - NETWRK CLR DOME CAME

































































Reviews: