-24-
You can monitor pictures from multiple cameras on a
multiscreen on the monitor multiscreen
Pictures of up to four cameras can be displayed as a
group.
To monitor camera pictures on the multiscreen, the
cameras need to be set up in advance. (See p. 50 for
details.)
Note:
Only still pictures (JPEG) can be monitored on a
multiscreen.
1:
Spot, go-return switch button
1-4:
Multiscreen 1-4 (Group A), go-return switch
button
5-8:
Multiscreen 5-8 (Group B), go-return switch
button
Click the Multiscreen 1-4 or 5-8 button, and you
can see 4 pictures at a time.
Preset Select
You can see the preset viewpoint by clicking one of the
16 buttons.
Go to Main Menu
Click this button to access the Main Menu.
WV-NS324
Indicates the name of the camera
ALARM
ALARM is indicated when alarm input is received.
AUTO PAN
On - Off switch button
HOME POSITION
The viewpoint is shifted to the HOME position when
clicking this button. The home position can be changed
only in the setup menu of the camera.
MULTI SHOT (Still picture)
Click the [MULTI SHOT] button.
8 still pictures are shown above of the joystick oval but-
ton in the camera control window.
Click one of the eight pictures; the camera focuses on
the preset position.
Notes:
• MULTISHOT does not work while a camera menu is
open.
• The MULTISHOT function is canceled when cam-
era control is performed.
• You cannot operate MULTISHOT during access by
other operators.
360 Map – Preset selector for MULTI SHOT
Select 360 Map or Preset by pressing the [
o
] button.
360 Map:
The camera takes 8 still pictures while pan-
ning automatically by 45 degrees.
Preset:
The camera takes 8 still pictures according to
Preset 1 to Preset 8.
Notes:
• Presets 9 to 16 are not available for taking pictures.
• If you skip a preset position number in the setting,
the skipped number cannot be preset afterward.
The skipped number is replaced with its next previ-
ous number, and the picture on the next previous
number is displayed on the position of the skipped
number.
• MULTISHOT does not work normally when operat-
ing on a low speed network.
• The 8 still pictures will be erased when clicking the
tabs of Alarm List or Setup Menu while executing
this function.
• The PAN LIMIT will be ignored when executing this
function.
• This function will stop when alarm arises.
Joystick Oval Button
Pan/tilt:
Press the left button of your PC mouse on
this button. The operation speed changes at
the clicked position; the outside is faster than
the middle position of the oval button.
Zoom/focus:
Press the right button of your PC
mouse on this button. The operation speed
changes at the clicked position; the outside is
faster than the middle position of the oval but-
ton.
AF:
Click the [AF] button, Auto focus turns on.
ZOOM:
Press the [WIDE] or [TELE] button for
adjustment.
FOCUS:
Press the [NEAR] or [FAR] button for
adjustment.
Or click the viewpoint of the camera image by
pressing the left button of your PC mouse on
the monitor screen; this shifts the clicked point
to the center of the monitor screen.
AUX
HIGH:
Output terminals are opened.(Open collec-
tor)
LOW:
Output terminals are shortened.(Open col-
lector)
IRIS
CLOSE:
Pressing closes the iris.
OPEN:
Pressing opens the iris.
RESET:
Returns the iris level to the factory default.
Access from a System Device
You can operate and set up the camera from connect-
ed system devices such as a Video Multiplexer, Matrix
Switcher, or system controller.
Note:
For operating the camera from a system device,
see the manual included with that device.
