-20-
Connection type
Item
Parameter description
Connection type 3
IP address
Enter the IP address assigned by your Internet service provider.
The setting is not required if your Internet service provider uses a
DHCP server (the DHCP server assigns an IP address to the
camera automatically).
Subnet mask
Enter the Net mask assigned by your Internet service provider.
The setting is not required if your Internet service provider uses a
DHCP server (the DHCP server assigns an IP address to the
camera automatically).
Default gateway
Enter the default gateway assigned by your Internet service
provider.
Host name
Contact your Internet service provider and enter the assigned host
name if required.
Network speed
Select the network speed by pressing the [
o
] button.
Selectable parameters: auto (default setting), 100 Mbps (full
duplex), 100 Mbps (half duplex), 10 Mbps (full duplex), 10 Mbps
(half duplex)
HTTP port
Use the default setting "80" for the HTTP port.
DHCP
Click ON if your Internet service provider uses a DHCP server
(DHCP server assigns an IP address to the camera automatical-
ly).
DNS
Click ON when using the DNS server.
Primary DNS
0, 0. 0. 0
Secondary DNS
Enter the IP address of DNS when using the DNS server.
Contact your Internet service provider for the IP address of the
DNS. Primary and secondary IP addresses can be set for the
DNS.
DDNS
Click ON when using DDNS function.
Host name
Ask your administrator
User name
Ask your administrator
Password
Ask your administrator
Access interval
Ask your administrator
Connection type 4
IP address
The setting differs depending on the setting of the router as fol-
lows:
If the router does not use DHCP: No setting required
If the router uses DHCP: The router needs to be assigned a pri-
vate IP address. This IP address must be different from the IP
addresses already assigned to the PC and other cameras.
For further information, refer to the operating instructions of the
router.
Net mask
The setting differs depending on the setting of the router as fol-
lows:
If the router uses DHCP: No setting required
If the router does not use DHCP: Setting of the net mask is
required.
For further information, refer to the operating instructions of the
router.
Default gateway
The setting differs depending on the setting of the router as fol-
lows:
If the router uses DHCP: No setting required
If the router does not use DHCP: The router needs to be assigned
a private IP address.
For further information, refer to the operating instructions of the
router.
