18
Installations/Connections
Installation of the camera
Before starting the installation/connection, prepare the required devices and cables. Refer to
the corresponding pages for further information.
z
Make a hole in the ceiling and fix the provided camera mount bracket over it. (
☞
page 19)
x
Line up the ends of the cables (12 V DC power cable, LAN cable (category 5 or higher),
cable from an external device and the provided audio cable) and the safety wire, and then
bundle them using the provided cable tie. (
☞
page 20)
c
Attach the provided safety wire to the safety wire holder of the camera. (
☞
page 20)
v
Make the connections of the 12 V DC power cable, LAN cable, audio cable and cable from
an external device. (
☞
pages 22 - 24)
b
Mount the camera onto the camera mount bracket. (
☞
page 20)
n
Adjust angle of the camera, angular field of view and focus. (
☞
pages 26 - 28)
Note:
When the camera is installed just above the photogenic subject
as
q
in the illustration, it may be difficult to adjust angular field
of view focusing around the subject.
To easily adjust angular field of view focusing around the sub-
ject, increase an angle (A) as
w
.
(A)
q
w
Subject
Safety wire
Ceiling
Safety wire holder
12 V DC power cable
Cable from an external device
Camera mount bracket
(provided as a standard
accessory)
Cable tie (provided as a
standard accessory)
Anchor bolt x4
(not provided)
LAN cable
Audio cable (provided as a standard
accessory)
Bundle the cables and
the safety wire together
Caution:
ONLY CONNECT THIS TO 12 V DC CLASS 2 POWER SUPPLY.
