29
3. Move the cursor to PUSH SET for ZOOM/FOCUS, and press the
CAM (SET) key. ZOOM/FOCUS is highlighted and “U ZOOM D/L
FOCUS R” appears.
4. Adjust the zoom or focus by using the joystick.
5. Move the cursor to POSI
O
, and press the CAM (SET) key. The
area title position appears on the monitor screen. If needed,
change the display position by using the joystick, and press the
MON (ESC) key.
An area title always appears under the camera ID.
If the camera ID and an area title are set to be shown in separate
positions, the area title appears above the camera ID.
6. Move the cursor to RET, and press the CAM (SET) key. The SPE-
CIAL 1 menu appears again.
Setting [ON (USER)]
If ON (USER) is selected on the SPECIAL 1 menu, the Area Title
selection menu appears. The screen has a number column and
title column above RET and RESET.
Note:
An area number followed by an asterisk * has already been
preset.
1. To select a camera direction, move the cursor to the desired num-
ber, and press the CAM (SET) key. The direction menu of the
selected number appears.
2. Adjust PAN/TILT, ZOOM/FOCUS and display the position in the as
same way as AREA TITLE, DIRECTION (NESW). See page 28.
3. To add a user-customized title, move the cursor to the title of the
desired number, and press the CAM (SET) key. The AREA TITLE
menu of the selected number appears.
Area Title Editing
1. Move the cursor to the desired character in the character field
using the joystick, and press the CAM (SET) key.
2. The selected character appears in the editing field and the blink-
ing cursor moves one position to the right.
3. Repeat steps 1 and 2 until one area title is completed.
4. Move the cursor to POSI
O
, and press the CAM (SET) key. The
area title appears on the monitor screen. If needed, change the
display position by using the joystick, and press the MON (ESC)
key.
→
PUSH SET
→
PUSH SET
** DIRECTION(NESW) **
PAN/TILT
ZOOM/FOCUS
POSI
U ZOOM D/L FOCUS R
+
N
RET
ZOOM/FOCUS setting menu
FLOOR 1
N
Display Position setting menu
→
PUSH SET
→
PUSH SET
** DIRECTION(USER) 1 **
PAN/TILT
ZOOM/FOCUS
+
NORTH
RET DEL
DIRECTION (USER) setting menu
** AREA TITLE(USER) **
1* NORTH
2
3 EAST
4 SOUTH-EAST
5 SOUTH
6 SOUTH-WEST
7
8 NORTH-WEST
RET RESET
AREA TITLE (USER) selection menu
** SPECIAL 1 **
PRIVACY ZONE OFF(ENB)
PROPO.P/T ON
AREA TITLE ON(USER)
PATROL STOP
ALARM IN/OUT
PASSWORD LOCK OFF
CLEANING OFF
EL-ZOOM ON
PRESET ALM OFF
IMAGE HOLD OFF
RET
Special 1 menu
