manualshive.com logo in svg

Panasonic WV-V1170, Operating Instructions Manual

Share
Download
Panasonic WV-V1170 Operating Instructions Manual Download Page 53

 

49 

 

Parameter 

Function 

SNMP Port 

The listening port of the proxy program of the device. It is a UDP port not a 
TCP port. The value ranges from 1 to 65535. The default value is 161 

Read Community 

It is a string. It is a command between the manage process and the proxy 
process. It defined the authentication, access control and the management 
relationship between one proxy and one group of the managers. Make sure 
the device and the proxy are the same. 
The read community will read all the objects the SNMP supported in the 
specified name. The default setup is public. 

Write Community 

It is a string. It is a command between the manage process and the proxy 
process. It defined the authentication, access control and the management 
relationship between one proxy and one group of the managers. Make sure 
the device and the proxy are the same. 
The read community will read/write/access all the objects the SNMP 
supported in the specified name. The default setup is private. 

Trap Address 

The destination address of the Trap information from the proxy program of 
the device. 

Trap Port 

The destination port of the Trap information from the proxy program of the 
device. It is for the gateway device and the client-end PC in the LAN to 
exchange the information. It is a non-protocol connection port. It has no 
effect on the network applications. It is a UDP port not TCP port. The value 
ranges from 1 to 165535. The default value is 162. 

Read-only Username 

Only when SNMP version is SNMP v3, you shall config this parameter. The 
default is public. 

Authentication Type 

Only when SNMP version is SNMP v3, you shall config this parameter. You 
can select either MD5 or SHA. The default is MD5. 

Authentication Password 

Only when SNMP version is SNMP v3, you shall config this parameter. 
Password requires min of 8 characters. 

Encryption Type 

Only when SNMP version is SNMP v3, you shall config this parameter. The 
default is CBC-DES. 

Encryption Password 

Only when SNMP version is SNMP v3, you shall config this parameter. 
Password requires min of 8 characters. 

Read&write Username 

Only when SNMP version is SNMP v3, you shall config this parameter. The 
default is private. 

Authentication Type 

Only when SNMP version is SNMP v3, you shall config this parameter. You 
can select either MD5 or SHA. The default is MD5. 

Authentication Password 

Only when SNMP version is SNMP v3, you shall config this parameter. 
Password requires min of 8 characters. 

Encryption Type 

Only when SNMP version is SNMP v3, you shall config this parameter. The 
default is CBC-DES. 

Encryption Password 

Only when SNMP version is SNMP v3, you shall config this parameter. 
Password requires min of 8 characters. 

 

Summary of Contents for WV-V1170
























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands