46
7.3.5.
SMTP (Email)
The [SMTP] interface is shown as in Figure 7-25.
Figure 7-25
Refer to the following sheet for detailed information.
Parameter
Function
SMTP Server
Input server address and then enable this function.
Port
Default value is 25. You can modify it if necessary.
Anonymity
For the server supports the anonymity function. You can auto login
anonymously. You do not need to input the user name, password and
the sender information.
Username
The user name of the sender email account.
Password
The password of sender email account.
Sender
Sender email address.
Authentication (Encryption
mode)
You can select SSL, TLS or None.
Title (Subject)
Input email subject here.
Attachment System
can
send
out the email of the snapshot picture once you check
the box here.
Mail Receiver
Input receiver email address here. Max three addresses.
Interval
The send interval ranges from 0 to 3600 seconds. 0 means there is no
interval.
Note that the system will not send out the email immediately when the
alarm occurs. When the alarm, VMD Audio Detection or the abnormity
event activates the email, system sends out the email according to the
interval you specified here. This function is very useful when there are
too many emails activated by the abnormity events, which may result in
heavy load for the email server.
Health Mail
Check the box here to enable this function.
