background image

[1] button:

 The letter “1” will turn green and images in the main area will be displayed in accordance

with the setting of “H.264(1)” (or “MPEG-4(1)”). (

®

page 84, page 90)

[2] button:

 The letter “2” will turn green and images in the main area will be displayed in accordance

with the setting of “H.264(2)” (or “MPEG-4(2)”). (

®

page 84, page 90)

[Image capture size] buttons

These buttons will be displayed only when a JPEG image is displayed.

[VGA]

The letters “VGA” will turn green and images in the main area will be displayed
in VGA size.

[QVGA]

The letters “QVGA” will turn green and images in the main area will be displayed
in QVGA size.

[640x360]

The letters “640x360” will turn green and images in the main area will be
displayed in 640 x 360 (pixels).

[320x180]

The letters “320x180” will turn green and images in the main area will be
displayed in 320 x 180 (pixels).

SW396

SW396

 

SW395

SW395

 

SC386

SC386

 

SC385

SC385

 

SC384

SC384

 

SW175

SW175

 

SW174W

SW174W

 

ST165

ST165

:

[1280x960]

The letters “1280x960” will turn green and images in the main area will be
displayed in 1280 x 960 (pixels).

[1280x720]

The letters “1280x720” will turn green and images in the main area will be
displayed in 1280 x 720 (pixels).

SW396

SW396

 

SW395

SW395

 

SC386

SC386

 

SC385

SC385

 

SW172

SW172

 

ST162

ST162

:

[800x600]

The letters “800x600” will turn green and images in the main area will be
displayed in 800 x 600 (pixels).

Note

SW396

SW396

 

SW395

SW395

 

SC386

SC386

 

SC385

SC385

 

SC384

SC384

 

SW175

SW175

 

SW174W

SW174W

 

ST165

ST165

:

The buttons [VGA], [QVGA] and [1280x960] are displayed only when “4:3”

*2

 or “4:3 (VGA)”

*3

 is

selected for “Aspect ratio”.

The buttons [640x360], [320x180] and [1280x720] are displayed only when “16:9” is selected for
“Aspect ratio”.

When “1280x960” or “1280x720” is selected for the image capture size, it may become smaller
than the actual size depending on the window size of the web browser.

SW172

SW172

 

ST162

ST162

:

The buttons [VGA], [QVGA] and [800x600] are displayed only when “4:3” is selected for “Aspect
ratio”.

The buttons [640x360] and [320x180] are displayed only when “16:9” is selected for “Aspect
ratio”.

[Image quality] buttons

These buttons will be displayed only when a JPEG image is displayed.

[1] button:

 Images in the main area will be displayed in accordance with the setting for “Quality1” of

“Image quality setting”. (

®

page 80)

[2] button:

 Images in the main area will be displayed in accordance with the setting for “Quality2” of

“Image quality setting”. (

®

page 80)

[AUX] buttons

*4

These buttons will be displayed only when “AUX output” is selected for “Terminal 3” of “Alarm” on the setup
menu. (

®

page 134)

[Open] button:

 The letters “Open” on the button will turn green and the status of AUX connector will

be open.

Operating Instructions

13

1 Monitor images on a PC

Summary of Contents for WV-SW396





















































































































































































































































Reviews: