19
Secure the camera to the camera mount bracket
The tilt angle is locked downward at shipment.
1
Loosen the tilting lock screw approx. 1 rotation and adjust the tilt angle of the camera to the
horizontal position.
2
Tighten the tilting lock screw again after tilt angle adjustment.
Note:
• Use a hexagonal wrench with width across flats of 4 mm (locally procured) to loosen or tighten
the tilting lock screw.
3
Pass each cable and the safety wire through the camera mount bracket, and secure the cam-
era to the camera mount bracket with the camera fixing screws x3 (accessories).
Pass the network cable first through the camera mount bracket before passing through the
other cables.
IMPORTANT:
• Ensure that the camera fixing screws are firmly secured.
Recommended tightening torque: 0.78 N·m {0.58 lbf·ft}
Camera main body
Safety wire
Network cable
Mounting boss for safety wire
Cable clamp
Drain slit
Camera mount bracket
(accessory)
Camera fixing screw x3 (M4 x 10)
(accessories)
Installations/Connections
Tilting lock screw
Camera main body
Horizontal
Approx. 90 °
Camera mount bracket
(accessory)
