Panasonic WV-SMR10, Operating Instructions Manual

Page: 12 / 80

2 Action at a malfunction notification
When an error is detected in the microphone element of the unit, a malfunction notification action will be
performed in accordance with settings. When an error is detected in the microphone element, contact your
dealer for assistance.
2.1 Action at a malfunction notification
Display the malfunction notification button on the “Live” page
When an error is detected in the microphone element, the malfunction notification button is displayed on the
“Live” page. (
®
page 9)
IMPORTANT
•
When “Polling(30s)” is selected for “Alarm status update mode” (
®
page 20), the malfunction
notification button will be refreshed in 30-second intervals. For this reason, it may take a maximum of
30 seconds until the malfunction notification button is displayed on the “Live” page after a malfunction
in the microphone element has occurred.
Notify of malfunctions to the designated addresses (Panasonic alarm
protocol notification)
This function is available only when a Panasonic device, such as the network disk recorder, is connected to
the system. When “On” is selected for “Panasonic alarm protocol”, the connected Panasonic device will be
notified that the microphone element of the unit is malfunctioning. The settings for Panasonic alarm protocol
can be configured in the “Failure Notif.” page. (
®
page 26)
12 Operating Instructions
2 Action at a malfunction notification