Panasonic WV-SFN611L Operating Instructions Manual Download Page 37

Page: 37 / 216

7.2 Playback “H.264(1)”/“H.264(2)”/“H.264(3)”/“H.
264(4)” images saved to the SD memory card

IMPORTANT

•

Depending on the network environment, download of video data may fail.

[PAUSE] button

Playback will be paused when this button is clicked during playback.

[PLAY] button

When this button is clicked, recorded data will be played.

Note

•

Audio data will not be played.

[FF] button

Each time this button is clicked, the playback speed will change. When the [PLAY] button is clicked during fast
playback, playback speed will return to the normal playback speed.

Note

•

The maximum speed of the fast playback varies depending on the setting of “Max bit rate” - “H.264
recording” of the SD memory card.

[5s backward] button

Each time this button is clicked, the recorded data goes back by 5 seconds and starts playing.

[5s forward] button

Each time this button is clicked, the recorded data goes forward by 5 seconds and starts playing.

[STOP] button

Playback will stop and the “Playback” window will turn to the “Live” page.

Operating Instructions

7 Playback of images on the SD memory card

Summary of Contents for WV-SFN611L

























































































































































































































Search results

Summary of Contents for WV-SFN611L

Reviews:

Related manuals for WV-SFN611L

Brands by name

Popular brands

Panasonic WV-SFN611L, Operating Instructions Manual

Search results

Summary of Contents for WV-SFN611L

Reviews:

Related manuals for WV-SFN611L

Brands by name

Popular brands