Panasonic WV-S15700-V2L Series Manual Download Page 85 | Manualshive

Page: 85 / 115

background image

85

Unique information

[MPR ID]

This ID is required to install the extension software. This also has a device ID unique to each camera.

[Remaining ROM]

The remaining ROM capacity in the camera for the extension software will be displayed. If an extension
software to be installed requires more capacity than the ROM capacity displayed here, installation of the
extension software is unavailable.

[

Remaining RAM]

The remaining RAM capacity in the camera for the extension software will be displayed. If an extension
software to be installed requires more capacity than the RAM capacity displayed here, installation of the
extension software is unavailable.

[SDK version]

Display the version information of the SDK installed in the camera. If the ext. software you install
requires a version number higher than the one shown here, the ext. software may not work properly.

[Firmware version]

The version information of the installed camera software will be displayed.

［

RAM capacity expansion mode

］

Select On/Off to determine whether to perform the RAM capacity expansion mode.

Default

：

Off

Note

• When “RAM capacity expansion mode” is set to “On”, the recording function to SD memory card by this
product cannot be used.
• If the minus is displayed in the “Remaining RAM” value, uninstall the ext. software or set the remaining
RAM to “On”.
• Click the [Set] button to restart the product. After restarting, the product cannot be operated for about 2
minutes, same way as when the power is turned on.

Ext. software

[Uninstall] button

The installed extension software can be uninstalled.

[Software version]

If you have installed ext. software, the version information of the installed ext. software is displayed along
with the version information of the SDK installed in the ext. software.
For ext. software that does not have SDK version information installed, the SDK version information will
not be displayed.

Note

• If the version information of the SDK embedded in the camera is less than the version number required
by the ext. software, the ext. software may not operate properly.

«
...
83
84
85
86
87
...
»

Summary of Contents for WV-S15700-V2L Series




















































































































Reviews:

No comments

Related manuals for WV-S15700-V2L Series

SECURICAM Network DCS-900

Brand: D-Link Pages: 92

SECURICAM Network DCS-900

Brand: D-Link Pages: 20

SECURICAM Network DCS-2120

Brand: D-Link Pages: 25

SECURICAM DCS-910

Brand: D-Link Pages: 7

Brand: D-Link Pages: 12

Brand: D-Link Pages: 4

Brand: D-Link Pages: 32

Brand: D-Link Pages: 8

DCS-6620G - Network Camera

Brand: D-Link Pages: 16

Brand: D-Link Pages: 8

Brand: D-Link Pages: 7

Brand: D-Link Pages: 24

Brand: D-Link Pages: 110

Brand: D-Link Pages: 66

Brand: D-Link Pages: 9

Brand: D-Link Pages: 4

Brand: D-Link Pages: 6

WIRELESS G DCS-950G

Brand: D-Link Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands