Panasonic WV-S15700-V2L Series Manual Download Page 52

Page: 52 / 115

25. Changed the initial value of “Audio input encoding format”

(Operating Instructions Configure the settings relating to images and audio

[Image/Audio] - Configure the settings relating to audio [Audio])

Due to the end of support for Internet Explorer, the initial value of [

Audio input encoding format

]

on the [Audio] tab will be changed to "AAC-LC".

[Audio input encoding format]

Select the audio input encoding format to be used in the “Live” page from G.726, G.711, or AAC-LC.

• Default:

AAC-LC

Note

• With a web browser, you can receive calls only with AAC-LC.
• G.711 is available only when the “Mic Input (To PC)” is selected for “Audio transmission mode”.
• G.726 is always applied for the audio transmission encoding format.

Summary of Contents for WV-S15700-V2L Series




















































































































Search results

Summary of Contents for WV-S15700-V2L Series

Reviews:

Related manuals for WV-S15700-V2L Series

Brands by name

Popular brands

Panasonic WV-S15700-V2L Series, Manual

Search results

Summary of Contents for WV-S15700-V2L Series

Reviews:

Related manuals for WV-S15700-V2L Series

Brands by name

Popular brands