18
4
Secure the camera mount
bracket (option) to an installation
position, and mount the camera
on the camera mount bracket.
Important:
• If the total weight of the camera and lens
exceeds 1 k
g
, use a housing to take mea-
sures against camera drop.
• Prepare mounting screws according to the
material of the area where the camera
mount bracket (option) is to be installed.
The installation method may be different
depending on the material of the area
where the bracket is to be installed.
• When installing on steel:
Fix with bolts and nuts (M6 or M8).
• When installing on concrete:
Fix with anchor bolts or AY plug bolts
(M6 or M8).
Recommended tightening torque (M6):
5.0 N·m
Recommended tightening torque (M8):
6.2 N·m
• The mounting conditions of the camera mount bracket are described as follows:
Installation
position
Recommended
screw
Screw quantity
Minimum pull-out
strength (per 1 pc.)
On ceiling
M6 or M8
4 pcs.
562 N
On wall
M8
4 pcs.
921 N
5
Secure the safety wire to the foundation part of the construction or a part
with adequate strength (minimum pull-out strength 196 N).
Prepare the fixing screw according to the material of the area where the safety wire is to be fixed.
For mounting on ceiling, use the safety wire, washer (accessory) and spring washer (accessory).
Important:
• The safety wire shall be adjusted to remove slack.
• Be sure to install the safety wire to prevent a fall of the camera resulting in injury or accidents in
case the camera comes off.
• To prevent the mounting strength from becoming lower, do not use wooden screws to secure
the safety wire.
Screws (locally
procured)
Screws (locally
procured)
<Installation sample on a ceiling>
Camera mount
bracket (option)
